printer friendly page

Dynamic Manufacturing Company, formed in 1951, specializes in the remanufacture of all makes and models of torque converters and transmissions. We are constantly evaluating pollution prevention/waste minimization alternatives including alternatives to solvent-based cleaners.

We replaced one of our solvent parts washers with a Solvent Systems aqueous parts washer to see if it lived up to the hype. It did and more.

Approximately 425 oily and dirty parts were cleaned using this system each day. Water was added to the system on a daily basis due to evaporation (minimal) and drag-out on the parts. Every other day, a five (5) gallon bucket of oil was decanted from the system’s oil separation mechanism. A simple turn of a valve allows the used oil to be drained from the machine keeping the cleaning solution always clean.

It is an incredible improvement over solvent. No odor, no risk of fire or explosion, reduces VOCs by 99.5%, reduces chemical and maintenance costs, and improves employee morale because it cleans so well and so easily.

Dynamic Manufacturing strongly recommends the Solvent System Aqueous Parts Washer System!